-
Gunpla
Mecha Musume
- Megami Device / Frame Arms Girl
- Eastern Model / Nuke Matrix / MS General
- 30MS
- LittleArmory
- Waterdecals
- Accessories
Other
-
Modo Colors
Splash Paint
Mr. Hobby
- Mr Color
- Mr Hobby Aqueous
- Mr. Lascivus
- GX Color
- Mr Metal Color / Super Metallic
- Mr Crystal Color
- Gundam Colors
- Paint Sets
- Gundam Markers
AK Interactive
Turbodork
Tamiya
AnchoreT
-
Waterslides
Customization Parts
Materials
-
-
-
-
-
-
-
-
-
-
-
-
topBandai Action Base 1 Display Stand 1/100 (Gray)
Bandai Action Base 1 Display Stand 1/100 (Gray)
Regular Price £5.64Vendor: Bandai
Product Type : Plamo
Hurry! Only7units left in stock!Canada wide Flat Rate Shipping15$ over $150/ 10$ over $150 / 0$ over $300Ottawa Same/Next Day Shipping10$ flat rate or free over 100$Lettermail Flat Rate Shipping3$ flat rate for Trading cards/DecalsStore CreditIn store credit can be used on all products online.Bandai's Action Base is designed to hold kits from their SD Gundam, 1/144 scale models, HGUC, HG Gundam Seed, 1/100 scale models, MG, and Real Robot Revolution series. No other display bases from other companies come close what this amazing display base allows you to do!
Action Base 1 is a plastic injection snap-fit assembly kit that requires very little work to assemble. No cement or paint required! The octagon base and the square part that can be connected to any one of its sides come with cool mechanical detailing and panel lines, plus a total of 10 holes for placing the support pole for the main stand to adjust the main stand's height. The support pole has an ingenious locking mechanism that allows it to extend or retract and is strong enough to hold the main stand in place. The main stand itself can also be extended upwards to pose your kit in a much higher position.
The set comes with three different sizes (8mm, 9mm, and 11mm) of U-shaped holders, peg-type holders, and screw-on type holders (two screws and a nut are included) for attaching the main stand to the crotch of the kit. When using the U-shaped or screw-on holders, double-sided tape (small quantity included) should be applied in between the crotch of the kit and the holders to hold it in place. A name plate is included that can be attached to any one of the holes on the base. (The package notes that there may be cases of a kit not able to fit.)
Each Action Base 1 can be attached to up to six other Action Base 1s for you to create an amazing display filled with Gundam kits or other robot kits striking cool action poses!
Returns/Refunds
To be eligible for a refund, the item must be heavily damaged. Shipping damage/torn packaging are common and often come that way directly from distributor to us. There will be no discount for lightly dented boxe and torn shrink wrap.
Please send us an email with proof of purchase and an image of the said item. We will try to get back to you as fast as possible.We are not responsible for packages if they become lost after they are dropped off or picked up by Canada Post. We will do our best to help locate the package by creating support tickets with Canada Post and keeping you up to date.
If you require additional insurance this can be found under menu > ship your private warehouse.Returns will not be accepted if the package is not in its original packaging. Return shipping will be paid by customer and refunded on receival +inspection of the product.
Cancellations
Order cancellations will be given in store credit.Please note, all purchase cancellations may not be listed as fulfilled. This means the order was already processed/shipped and cannot be canceled. Once the item(s) are shipped, they are no longer eligible for cancellation.
Pre-Orders and Orders in the "Private Warehouse" are locked in. if you cancel with a good reason before shipment you will incur a 10% restocking/preorder fee. This is to cover holding the item under your name, ordering quantity based on sale and transactional fees occurred on sale/refunds.
Private warehouse cancelation older than 7 days will also incur 10% fee. After the 2 months limit, if we have contacted you via email twice we have the right to cancel a given warehouse with 10% fee all in store credit) The items will then be returned to inventory.
SEZZLE: Due to the higher fee imposed by sezzle. There will be an extra 10% fee ontop of our normal cancelation policy.Added To Cart :Add To Cart Failed :prouduct successfully added to wishlist !Trinity Grading Guide
''Near Mint (NM)'
Near Mint condition cards show minimal or no wear from play or handling and will have an unmarked surface, crisp corners, and otherwise pristine edges outside of minimal handling. Near Mint condition cards appear 'fresh out of the pack,' with edges and surfaces virtually free from all flaws. '
'
''Lightly Played (LP)'
Lightly Played condition cards can have slight border or corner wear, or possibly minor scratches. No major defects are present, and there are less than 4 total flaws on the card. Lightly Played condition foils may have slight fading or indications of wear on the card face. '
'
''Moderately Played (MP)'
Moderately Played condition cards have moderate wear, or flaws apparent to the naked eye. Moderately Played condition cards can show moderate border wear, mild corner wear, water damage, scratches , creases or fading, light dirt buildup, or any combination of these defects. '
'
''Heavily Played (HP)'
Heavily Played condition cards exhibit signs of heavy wear. Heavily Played condition cards may include cards that have significant creasing, folding, severe water damage, heavy whitening, heavy border wear, and /or tearing. '
''
''Damaged (D)'
Damaged condition cards show obvious tears, bends, or creases that could make the card illegal for tournament play, even when sleeved. Damaged condition cards have massive border wear, possible writing or major inking (ex. white-bordered cards with black-markered front borders), massive corner wear, prevalent scratching, folds, creases or tears. '
'
-
Gunpla
Mecha Musume
-
Modo Colors
topBandai Action Base 1 Display Stand 1/100 (Gray)
Bandai's Action Base is designed to hold kits from their SD Gundam, 1/144 scale models, HGUC, HG Gundam Seed, 1/100 scale models, MG, and Real Robot Revolution series. No other display bases from other companies come close what this amazing display base allows you to do!
Action Base 1 is a plastic injection snap-fit assembly kit that requires very little work to assemble. No cement or paint required! The octagon base and the square part that can be connected to any one of its sides come with cool mechanical detailing and panel lines, plus a total of 10 holes for placing the support pole for the main stand to adjust the main stand's height. The support pole has an ingenious locking mechanism that allows it to extend or retract and is strong enough to hold the main stand in place. The main stand itself can also be extended upwards to pose your kit in a much higher position.
The set comes with three different sizes (8mm, 9mm, and 11mm) of U-shaped holders, peg-type holders, and screw-on type holders (two screws and a nut are included) for attaching the main stand to the crotch of the kit. When using the U-shaped or screw-on holders, double-sided tape (small quantity included) should be applied in between the crotch of the kit and the holders to hold it in place. A name plate is included that can be attached to any one of the holes on the base. (The package notes that there may be cases of a kit not able to fit.)
Each Action Base 1 can be attached to up to six other Action Base 1s for you to create an amazing display filled with Gundam kits or other robot kits striking cool action poses!
Returns/Refunds
To be eligible for a refund, the item must be heavily damaged. Shipping damage/torn packaging are common and often come that way directly from distributor to us. There will be no discount for lightly dented boxe and torn shrink wrap.
Please send us an email with proof of purchase and an image of the said item. We will try to get back to you as fast as possible.We are not responsible for packages if they become lost after they are dropped off or picked up by Canada Post. We will do our best to help locate the package by creating support tickets with Canada Post and keeping you up to date.
If you require additional insurance this can be found under menu > ship your private warehouse.Returns will not be accepted if the package is not in its original packaging. Return shipping will be paid by customer and refunded on receival +inspection of the product.
Cancellations
Order cancellations will be given in store credit.Please note, all purchase cancellations may not be listed as fulfilled. This means the order was already processed/shipped and cannot be canceled. Once the item(s) are shipped, they are no longer eligible for cancellation.
Pre-Orders and Orders in the "Private Warehouse" are locked in. if you cancel with a good reason before shipment you will incur a 10% restocking/preorder fee. This is to cover holding the item under your name, ordering quantity based on sale and transactional fees occurred on sale/refunds.
Private warehouse cancelation older than 7 days will also incur 10% fee. After the 2 months limit, if we have contacted you via email twice we have the right to cancel a given warehouse with 10% fee all in store credit) The items will then be returned to inventory.
SEZZLE: Due to the higher fee imposed by sezzle. There will be an extra 10% fee ontop of our normal cancelation policy.
